Used shot blasting and sandblasting machines
53 results
Click here to find out more about the range
Reconditioned machines, supplied with a manual and CE marking. Pricing is given only on request, after we look at your parts and your output.
Shot blasting machine with a rubber belt L50
The rubber belt treats parts in bulk, with a high output and a contained running cost. Parts are loaded into a chamber fitted with a rubber belt. Cleaning comes from the abrasive thrown by 1 turbine and from the belt movement, which tumbles the parts.
Price on request
Shot blasting machine with a rubber belt L50
The rubber belt treats parts in bulk, with a high output and a contained running cost. Parts are loaded into a chamber fitted with a rubber belt. Cleaning comes from the abrasive thrown by 1 turbine and from the belt movement, which tumbles the parts.
Price on request
Sandblasting machine with a pull-out table
The operator places the parts on the cabinet floor or on the pull-out table, then blasts by hand with 1 gun.
Price on request
Shot blasting machine with a rubber belt L50
The rubber belt treats parts in bulk, with a high output and a contained running cost. Parts are loaded into a chamber fitted with a rubber belt. Cleaning comes from the abrasive thrown by 1 turbine and from the belt movement, which tumbles the parts.
Price on request
Sandblasting machine PAL 3 with basket
The operator places the parts on the cabinet floor or in the rotating octagonal basket, then blasts by hand or automatically in the basket with 1 gun.
Price on request
Shot blasting machine with a rotary table T50
The machine stands directly on the floor, with no foundation. A rotary table is a straightforward way to treat a surface: the part rests on the table, which turns and presents the top and side faces to the abrasive thrown by the turbine. Table diameter…
Price on request
Shot blasting machine hanger-type BANFI GR12X20-3TR
Hanger-type shot blasting machine for parts of different shapes, sizes and weights: welded fabrications, stampings and castings. Parts are hung in clusters on the overhead conveyor. Loading happens on the hook outside the cabin while another hook is being blasted inside. Cluster travel and the…
Price on request
Cartridge filter FC20
Automatic cartridge filter, to be paired with a shot blasting machine or a deburring machine. It extracts dusty air from an automatic process. It is intended for non-explosive dust.
Price on request
Shot blasting machine with a rotary table T17X13-2TR
The machine stands directly on the floor, with no foundation. A rotary table is a straightforward way to treat a surface: the part rests on the table, which turns and presents the top and side faces to the abrasive thrown by 2 turbines. Table diameter…
Price on request
Shot blasting machine with a tunnel mesh-belt pass-through 2+1 turbines
Automatic shot-blasting tunnel with a manganese-steel mesh belt. Small parts resting on the belt are treated in a single horizontal pass. Turbine speed and belt speed are set by inverter. Loading and unloading can be manual, or automated with a robot, a conveyor or a…
Price on request
Shot blasting machine with a tunnel for tubes 1 turbine
Through-feed tunnel with biconical rollers and 1 turbine throwing metallic abrasive. Parts travel at a variable speed in front of the turbines. The abrasive removes oxide and mill scale and leaves the roughness needed before painting.
Price on request
Peening machine satellite
Depression peening cabinet: a rotary table with four satellites, several guns, dust filtration and an abrasive hopper. The operator places the part on the prepared pin. Indexing then presents one pin to unload and one pin to load.
Price on request
Shot blasting machine with a tunnel mesh-belt pass-through DTB 700X500-4TR
Automatic shot-blasting tunnel with a manganese-steel mesh belt. Small parts resting on the belt are treated in a single horizontal pass. Turbine speed and belt speed are set by inverter. Loading and unloading can be manual, or automated with a robot, a conveyor or a…
Price on request
Shot blasting machine with a steel belt TM 10
The steel belt treats parts in bulk, with a high output and a contained running cost. Parts are loaded into a chamber fitted with a steel belt. Cleaning comes from the abrasive thrown by 2 turbines and from the belt movement, which tumbles the parts.
Price on request
Sandblasting machine CS100
Parts are lined up on the conveyor. When the cycle starts, the belt moves at 1 m/min, adjustable by inverter. 4 nozzles across the direction of travel, fed by timed sensors, throw abrasive over the full width. The machine has an entry chamber and an…
Price on request
Sandblasting machine VAPORMASTER 1717
The operator places the parts on an external rotary table, then blasts with a lance. The lance throws abrasive together with water. The table is turned by hand to finish every face.
Price on request
Shot blasting machine tunnel mesh-belt pass-through STL 850 - 8TR
Automatic shot-blasting tunnel with a manganese-steel mesh belt. Small parts resting on the belt are treated in a single horizontal pass. Turbine speed and belt speed are set by inverter. Loading and unloading can be manual, or automated with a robot, a conveyor or a…
Price on request
Shot blasting machine with a rotary table SISSON TR2200
The machine stands directly on the floor, with no foundation. A rotary table is a straightforward way to treat a surface: the part rests on the table, which turns and presents the top and side faces to the abrasive thrown by 2 turbines. Table diameter…
Price on request
Shot blasting machine tunnel mesh-belt pass-through CWB 850 4/F AC
The machine stands directly on the floor, with no foundation. The manganese-steel mesh-belt tunnel treats parts that cannot be hung. A part resting on the belt presents its faces, including the underside, to the abrasive thrown by 4 turbines.
Price on request
Shot blasting machine with a tunnel roller pass-through ISTB4
Automatic roller shot-blasting tunnel, suited to bars and rounds. Parts are treated in a single horizontal pass. Roller speed is set by inverter. The plant has 4 turbines facing each other.
Price on request
Shot blasting machine satellite for wheels
Machine with 5 satellites. The operator places the parts on the table, sets the time on the panel and starts the cycle. The table indexes and 2 turbines on the upper side do the blasting. Parts are blown off at the last station. At each…
Price on request
Desanding shot blasting machine hanger-type 20X30-4TR
Hanger-type shot blasting machine for parts of different shapes, sizes and weights: welded fabrications, stampings and castings. Parts are hung in clusters on the overhead conveyor. Loading happens on the hook outside the cabin while another hook is being blasted inside. Cluster travel and the…
Price on request